|
Re: How hard to change the cats on 96 3.8l
I did it to my 96. It was a pain but it wasn't too bad. I don't know why the manual says that. There are plenty of other things in the manual that are alot harder to repair. You will need to use plenty of penetrating oil but make sure to have all the oil gone before you start it as penetrating oil is very flammable. The last time I had to remove it one of the studs on the rear manifold broke so be carefull of that. You can't drill and tap it while it's on the motor and removing and reinstalling it was a BIG pain.
|