View Single Post
  #7  
Old 10-28-2007, 03:01 PM
Brian R.'s Avatar
Brian R. Brian R. is offline
Resident Chemist
 
Join Date: Feb 2004
Posts: 8,586
Thanks: 105
Thanked 158 Times in 158 Posts
Send a message via Yahoo to Brian R.
Re: 2001 4Runner 2x4 - Hesitations, Jerking

Quote:
Originally Posted by traper 1
where is the oil filter located -4runner 2001? Do i have to remove the plate to access it?
Welcome to the AF!

To start an off-topic discussion, please start a new thread.

The oil filter is on the driver side of the engine above the front differential. You access it either through the left wheel well by loosening the rubber splash shield and reaching through, or from below by removing the skid pans and reaching up in front of the suspension on the left side.

If you change the oil and/or remove the oil filter without removing the skid pans, you will have an oil mess on top of your skid pans which will drip off for a while, and leave a greasy mess on the top of your skid pans, front differential, etc. I suggest you remove your skid pans to change the oil and/or remove the oil filter. You can then wipe the oil off the front differential and any other components that get dripped on by removing the oil filter. There is some oil left in the filter, even after you have drained the oil from the pan.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html

"What we've got here is a failure to communicate"

Last edited by Brian R.; 10-28-2007 at 03:34 PM.
Reply With Quote