Thread: Passlock System
View Single Post
Old 10-24-2007, 06:14 PM   #174
MT-2500
AF - Advisor
 
MT-2500's Avatar
 
Join Date: Sep 2005
Location: New London, Missouri
Posts: 16,690
Thanks: 5
Thanked 121 Times in 120 Posts
Re: Passlock System

Quote:
Originally Posted by Malibu_Newbie
Just curious is there a way to test this at home (IE not taking it out and taking it to town) to test this?
Yes
Check at starter.
Make sure it is in park gear.
Jumper small wire to the battery cable post on the starter solenoid and see if starter works.
Or if you can find the small wire to sstarter solenoid you can jumper 12 volts to it for a starter test.
If starter works get a test light and see if small wire at solenoid is getting 12 volts on key on start position.
If no 12 volts go back to neutral saftey switch or ign switch and check for start position voltage.
Also check all fuses you could have blowed a fuse.
Good luck
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
MT-2500 is offline   Reply With Quote