|
Re: Clunk when braking in reverse
My first guess based on my own experiences is to check the brake hardware, especially the bracket-to-knuckle bolts. It sound to me like you may have a loose one, or may be missing one.
Pull the wheel off and verify that you have 2 bolts that hold the caliper bracket to the knuckle, and then verify that you have 2 bolts holding the caliper to the bracket. Then make sure they are all tight. Rinse and repeat for each wheel of the car.
__________________
2000 Oldsmobile Intrigue 3.5 DOHC V6
Mods: Fenderwell Intake, High-Flow cat, U-bend delete, 12-inch front rotors, GMPP handling kit, 20% tint, Pioneer front and rear speakers, Eclipse HU, cleared corners
1986 Jeep Cherokee 2.8 V6
|