Quote:
|
Originally Posted by MT-2500
First thing check for the front Axel locking in.
Does the front drive shaft lock in for 4 W drive.
Jack it up on stands and have a look at drive shafts turning.
If both drive shafts turn then check front Axel for locking in.
MT
|
I fixed a main vacuum hose that was off at the transfer case and hoped for 4 wheel drive but when I put it up on 4 jackstands in 2 wheel drive the driveshaft turns and so do the wheels but in 4 wheel hi and low the driveshaft spins without any problem or noise but the front wheels do not but spin freely by hand.
