[06scooby]

Well this afternoon it was pretty warm outside and the car ran like absolute crap!! We cleared the codes from the computer and then restarted it and the service engine light came back on in about 10-15 seconds and the car wouldn't maintain the idle. I plugged the scanner back in and I only got 2 of the original 4 codes. I got Code 14 and Code 43. 14 is obviously the coolant temp sensor so it is getting changed tomorrow. Code 43 on the link posted above says knock sensor but in the Haynes manual it says it is a Ignition Module error. so is that the unit that all the coil packs are mounted to? We are going to try the coolant sensor first but would that really cause it to run that poorly?