[p9o1r1sche]

Thanks for all the comments, everyone. I did spend alot of time in the man-shed cutting metal for this one. I have posted up in the 'completed' subforum, so you can see finished product.

I chose to put the rivets on after painting and polishing the body so that I could have a polished surface right up to the edges of the rivets. Didnt know if I was making a mistake or not at the time, because I didnt know if the paint around the rivet holes would chip and flake off when I cleaned the holes with a drill to install the rivets. Fortunately, it wasnt a problem.