[JCL82]

So i change out the fuel pump. I had some issues with the new pump and wire harness. I guess i have a CA truck and there is two connectors on the truck(fuel pump) and i bought the one with just one. So i go to napa and find out that they also change the wire connection for the fuel pump ,other the being square connector you have to change it to a line(can't think of a name) connector . Which it all work out. The gas tank is plastic, which i guess is good because it was very light to drop and i ran the truck until the fuel light came on. The hardest part had to be the fill tube, you have to unscrew it. also You have a ground wire running off it and it goes above the frame. So you have to bend it around to get it right but to get it back on it's a pain because yo uhave to line up the holes by the gas gap to screw it on right.
Then you have to tighten the hose clamp on the gas tank and fill tube.