|
Re: Just need a little direction in removing the alternator from my '99 zr2
First step is to remove the neg. battery cable to keep from shorting out anything.
Then figure out your tightner pulley and get the belt off.
The alternator should have one bolt on power feed wire and a plug in for the other wires.
The alternator is just unbolt and bolt back on deal.
You should have a belt routing diagram under the hoood for belt routing.
If not draw one out or take a picture of it before taking the belt off
Good luck
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
|