[Classicrocjunkie]

Our wheel bearings are a sealed unit. You pull that apart in anyway, i'm pretty sure your not going to be able to get it back together properly.

All you have to do is, remove the nut on the steering cv shaft, get all the braking components out of the way ( rotor and caliper), with a punch hit the cv shaft to break it loose a bit so it has some play in and out, remove the 3 torqs bolts and then with a plastic mallet tap the perimeter of the wheel bearing and it will come out of the steering knuckle. When you reinstall the wheel bearing you do not have to press it back into the steering knuckle.