|
Pop off the panel to the left of your passenger's left foot. Your ECU is there. There is a clear sticker covering a screw. Peal the sticker off to expose the screw. Turn the ignition to the ON postion. using a flat head scewdriver, turn the screw on the ECU clockwise all the way, hold for two seconds, and turn back. It should start flashing it's codes. Write down the number of slow and fast pulses to represeent each error code. Five slow and five fast indicate no codes. To switch back from diagnostic mode, do the turn thing again. Turn ignition to off.
To clear the trouble light, you will need to do this again to reset the trouble codes.
|