|
Re: few questions
Wonder if whoever did your IMG changes were over torquing them. Isuzu changed the value a few times to prevent them from cracking. The latest torque value is 13 ft lbs. Should be done with an inch lb wrech since ft lb wrenches will not be accurate enough at that low of a setting. Should not have to be done more then once.
For the fan clutch I would just go aftermarket or even a used one from salvage yard. Aftermarket might work a little different and lock up more often but wont hurt anything.
__________________
--Dave
1999 Rodeo LS 3.2 4x4 5 Speed
32x11.50-15 BFG T/A KO
3" Lift - Rancho 9000x
Rear No-Slip Locker
Flowmaster 2.25" 50 Series
There is a very fine line between "hobby" and "mental illness." - Dave Barry
|