[richtazz]

Getting that seal seated properly is the hardest part. Be patient, take your time, and if you have the pass thru armrest in the back seat, that may be a more comfortable access point for you. If you don't have the pass-thru rear seat w/armrest, you could also remove the lower seat cushion (two pull tabs in the seam of the carpet and lower cushion, and the rear seat back (4 bolts along the bottom (2 also anchor the rear seatbelts) and then lift the seatback up to disengage the top of the rear seat cushion. Then you may have more room to move to get that o-ring seated properly.