View Single Post
  #7  
Old 07-24-2007, 06:30 PM
nymorey nymorey is offline
AF Regular
Thread starter
 
Join Date: Dec 2004
Posts: 117
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to nymorey
Re: 1.7:1 3.0L Full Roller Rockers

Quote:
Originally Posted by e_powers
no. only need to get higher octane is pinging (which is only a bandaid) or if you supercharge and are retuned for it. you can do a different mod that will help a little. ford thought it would be cool to run coolent through the intake on the 98s, 99s, and i think the 00s, to the ranger guys bypassed it to cool off the intake some. it is called the hot water bypass mod. a place for you to check out for more specific ranger stuff is http://www.rangerpowersports.com/forum/ the guy that put together the roller rockers kits at the site you mentioned is a mod at the forums i posted
Thanks e powers. I realize that if I have pinging I have to use higher octane and I realize there are other issues if it is pinging. I am not having that problem now.

What I am asking is: If I install the rocker mod, would I have to go to a higher octane. I'm not clear as to what the mod does to increase the performance.

As for the hot water mod. Don't waste your time. You won't gain anything. I tried is and it didn't do anything. The hot water is there for a reason, which I believe is to "cool" the egr exhaust gases (which is a lot hotter than the coolant) which are ported back into the intake for reburn. The best bang for me was the underdrive pulley.
Reply With Quote