Quote:
|
Originally Posted by 5greenmonkies
Quick question. I am going to pull the cowling (spelling) off what I believe to house the blend door. This compartment sits on top of the blower motor and has 6 sheet metal screws holding it in place. If this has the blend door, that I hope to be the problem, then what is the apparatus called that is actually directing the air flow in the rear? Is this an actuator? I can see it sitting between the air vent and the vehicle skin and is nearly square in shape and thin. More to follow.
|
On the temp control it was called temp control motor at the dealer. I took the part in when I found out it was my problem... Now in your case not sure what you are looking at but if its electronic control it would be a motor if it vac control it would be actuated from what I understand.. Although my door locks are control by motors they tend to say actuated. But if you find that to be your problem I would just carry the part to the dealer. I am sure there the only ones to carry that part.. other than a junk yard..