Quote:
|
Originally Posted by DB1973
I have a 93 BPA. I found a couple cracks in the plastic air box that the air filter is within. I would rather replace the whole air intake versus repairing the stock intake (just for something to do), and I have no problem with fabricating short ram or cold air intake, but here are my concerns....
I have 2.5 inch tubing and a 2.5 inch cone air filter left over from another project. If I use tubing that is 2.5 inches in diameter, will that be just as or more efficient as the stock intake system? I am used to building 3 and 3.5 inch set-ups....and I just want to be sure that I will not be reducing the air needs of the motor.
Thanks for any advice!!  |
anything that allows more air in is better for it.