You still have not said if you have Auto Climate Control, or the manual system. If you have ACC and the blower does not have power without a jumper, you need a new blower control module. It is located in the top firewall blower box, below the fuse/relay center, passenger side. You will need to remove two nuts from the studs holding the relay panel to the firewall and move the fuse/relay panel forward to see the control module.
BTW, beware of using an unfused jumper wire to the blower motor without a relay to energize it.
The motor pulls 18-22 amp and if not connected through a relay, it will eventually melt the insulation and could go direct to ground. The end result could be an engine compartment fire! You need to fix this problem ASAP! Do not use a direct jumper to the blower motor!
