Quote:
|
Originally Posted by Steamfitter
Trooper step # 8 in the chart is giving me trouble.
If the vac gauge is hooked up like they say it will be monitoring the intake manifold-press./vac.In doing that I had 15-17in/Hg but wer'e looking for 1 in./hg available at solenoid.
So am I supposed to go through the solenoid for this test?Seems like the only way to get the correct reading.This manual is full of incomplete sentences and broken English,so maybe I missed something.I plan to try testing through the solenoid as soon as this thunderstorm is over.SF
|
like
gizmo said and pasted. that measurement is to make sure you have adequate vacuum
available to the valve. they reference in the instructions iirc to test at the tb port that you took the hose off in the first step. you could also measure it at the hose end you take off the valve (not through the valve), which i guess might be even better to make sure the hose isn't plugged or open somehow.
//bc