|
Re: Disabling DRL
between the front bumper and the rad, there is a ceramic resistor for the drl's. if you disconnect this, the drl's will be disabled, however, the check engine light will come on with no codes. I took one of the wires from the bcm and grounded it as well to turn the check engine light off. As for the brake light, is it only the brake light, or is it also the abs light?? If it's just the brake light, chances are the brake fluid is low,signalling that you most likely need brakes. There is a float sensor in the resivoir that can stick in the down position. If you top the brake fluid up and the light is still on, smack the side of the resivoir to get the float to pop back up.
|