|
Re: B16A into 91 civic axle question
did you get a wheel alignment done after you changed out the spindles for your swap? Are you sure your pushing the axle into the trans all the way so the circlip is engaging nice and tight? After that many axles there must be something going on there. Aside from a really bad wheel alignment issue, the only thing I could see causing your problem are misaligned mounts (or wrong ones altogether), the circlip isn't locking the axle into the tranny, or your axle nut isn't on tight enough.
__________________
89 crx SI - spoiler, custom viper blue paint job, Z6 just completed, stock 14's with a 3 inch drop, sidemarkers, and the stereo
"my crx is like my woman: don't like anyone touching her, or driving her but me!" 
|