|
Re: 97 Tahoe Keyless Entry
1) At the data link connector. Use fused jumper wire between pin 4 (black wire) and pin 8 (black/white wire) Doors should lock, then unlock
2) Press and hold LOCK and UNLOCK on the transmitter until door locks cycle (about 10 seconds)
3) Repeat step 2 for additional remotes
4) Remove jumper, and test remotes.
__________________
Replacement keyless entry remotes available here - up to 90% off -
All makes/models from Acura-Volvo, 1988-present -
http://www.OriginalKeyless.com
|