|
Re: 1996 Grand Am Cooling Questions??
if you can not find that bleeder valve, turn the heat on, remove coolant reservoir cap, let your car idle until fan turns on and off, put the cap back on all the air shoud be out. If your head gasket is blown you will see steamy exhaust, and what you hear from your exhaust is misfire. Take two sparkplugs out see if they are wet. Usually when all your sparkplugs are wet from coolant your gas pedall will pulsate on acceleration. Sometimes that red coolant when it mixes with oil will not turn into that milkshake looking thing so do not judge your head gasket by that. Check your oil level if it is too high. Do not overfill your coolant reservoir !!!
|