[jamesnoll]

Fred;
This is a fairly easy process. Just follow the manual. After market Tran coolers use a special nylon zip tie to fasten it to the condensor. On the van you may find it easier to pull the front grill and make your own mount. This is what I did. I used to pieces of flat stock iron that spand across the front of the condensor I screwed them to the condensor mounts then bolted my trans cooler to flat stock iron. If you do this be very carefull to not damage the condensor. Damage to the condensor can be a very expensive repair. If you are not comfortable working around the condensor have a certified service person install the trans cooler.

JN