:o Install is pretty easy.
1. you take the 2 screws from inder your radio panel.(remove entire panel around radio).
2. the panel around and over your steering wheel there are some more screws that were hidden under step 1 that should now be visible. also the 2 screws in your cluster area pry gently.
caution on your rght side in american vehicles there's this small grill thing there is a screw holding this together it's a bitch to take apart so undo the plastic scrunchy type hose by tugung on it it's easier this way.
disconect all switches & you should be clear to pull over steering wheel.
btw its a bitch to take off the steering wheel then to re-align forget about it.
3.4screws around cluster make sure to use a screw driver with a magnetized tip it will save you from having to curse the screw from falling into crevices I did it so save yourself some heated moments, gently pulll cluster out don't yank.
4. unplug wiring harnesses in the rear of cluster try not to be ruff with the back of the cluster its like a thin motherboard & it's out!
remember were your screws go cause there are some longer than other's.
I think that's all if I forgot something someone will add it.
I will be doing a write up soon on this, I will be finished next week, the G is in the shop being detailed so I haven't had a chance to snap pic's.
