|
Re: Clutch problems
If there is any noise or vibration from clutch it is a internal problem or the clutch needs pulled out and checked.
On the soft pedal half way down.
The clutch release fork or throw out bearing should not have a lot of free play or travel.
Did anyone install a heavy return spring on slay cylinder linkage.
Once the slay cylinder is pushed out or pushed the throw out bearing and against the pressure plate fingers it should stay close to there.
The best way to bleed the slay cylinder is with a gravity bleed.
With master cylinder top off and full of fluid open slay cylinder bleeder and let it gravity bleed.
__________________
Remember proper testing gives us the answer to many problems.
MT
|