|
94 ranger no start 2.3 5spd
Checked for spark no spark. Put in a new ICM and still no spark. CHecked timing-ok, timing belt ok. Fuel pump ok-it primes and has pressure. Check for injector pulse and no pulse. I swapped the ecm relay with the ac relay and didnt do anything. I checked ground by ecm and starter solenoid and there ok and clean. I checked for power to ecm and it has power at 3 spots. I think its the ecm because the wiring diagram says the ecm grounds injectors and ignition coil. ANy thoughts, a new ecm is 310.00 and no junkyards have them locally...
|