[A10ECGent]

New update its still not right Since last post I have replaced fuel pump drained all fuel from tank to ensure it was not contaminated. I am still having problems now it will start fine but runs rough for about the first 60 secs or so When ou drive it it runs great for short distance (a mile or so)When ou get on the hway after a couple of miles it feels like it is running out of gas i downloaded winaldl and hooked it up i don't really know what i'm watching for but i did notice that the 02 sensor data was jumping like crazy at stead throttle it will go from .04 to upwards of .900 the battery voltage will show correctl at times and sometimes it shows no voltage in the battery voltage line but the fp/ps switch line shows the correct voltage.before running the winaldl when i was just checking the codes by flashing I would get an occasional knock sensor circuit or a high map voltage or rich exhaust but never with an consistency it is almost like it just wants to through a code so it just picks one out. Does this sound like a bad computer or is there something i am missing by the way the 02 sensor is a new bosch and the new pump is a delco not advance junk could it be bad injectors(they came from a car that had been totaled,bad front end impact) I appreciate your help I'm about ready to give this thing a dynamite enema