|
Re: Brake light issue
Actually we do get replies that the MFS switch corrected the issue but not in some of the threads. The part that goes bad causing the lack of the two stoplights less the third is the 4 way hazard switch part of the MFS.
On a few occasions it was wiring at the main engine compartment fuse box and on another one of the lamp sockets but that was blowing a fuse. The fuses are either at the engine compartment fuse box or the one by the glovebox. There are maps/placard to go by.
The MFS is expensive at a GM dealer. You can get one used from Ed Morad and someone on the forum may have a spare and looking to get rid of it. They have new aftermarket on EBay for around $125.00.
It is about a one hour DIY job.
And welcome to AF.
|