View Single Post
  #3  
Old 04-21-2007, 09:29 AM
dugan50's Avatar
dugan50 dugan50 is offline
Authorized Vendor
 
Join Date: Mar 2007
Posts: 283
Thanks: 0
Thanked 3 Times in 3 Posts
Re: Horn + Cruise Control not Working

Hello:
A Geo Prizm is a Toyota built vehicle. You are probaly correct in assuming the probelm with your car is a damaged 'clockspring'. This component may or may not be available by itself and should only be purchased from the dealer. A used one may geive you more trouble than you already have.
To diassemble it, you will need to
1) disconnect the battery and wait 10 minutes
2) unbolt the airbag (2 - 30torx bolt on the sides through acces holes)
3) remove the wires attaching the airbag to the column
4) remove the steering wheel (MARK THE POSITION THE WHEEL WAS IN)
5) remobve the steerong column covers
6) remove and replace the clockspring attached to the multifunction switch

Installation is the reverse procedure
__________________
I hope this was helpful to you. My information comes from years of experience in these businesses.
http://www.airbagsolutions.com http://www.stolenandrecovered.com
Airbag Service, Airbag Replacement, Airbag Diagnostics


Thank You,
Douglas Gan
Reply With Quote