[orangekitty]

The front doors will take a 6.5" as long as it's a shallow mount, UNDER 2" depth (and yes, every fraction of an inch DOES count so don't think you can get away with it). You need to buy a 1" speaker spacer ring as well; your speaker set should come with at least a metal mount ring -- use it, it bumps up the space height by a tenth or so. The speaker I had (infinity) also came with a plastic riser ring that bumped up the height another tenth or so. Have a drill handy to make new screw holes (you do NOT need to cut the sheetmetal for the speaker center as the stock hole is already big enough). And no, you can't use a 1.5" spacer to fit a deeper speaker mount because the door panel surely can't handle that inside its stock grill -- Well I guess you could tear apart your door panel but it's not worth it. Just get shallow mounts. Anyways, I did this with Infinity Reference 6012si's in case you want to reference its mount specs.