Sorry for bringing this thread back from the dead, but I need some clarification regarding bushings. For the front lower control arm there are 2 bushings (inner and outer), correct? I'm guessing the inner bushing is the one closest to the inside of the car at the front (front pivot bolt) and the outer is the one at the rear (rear pivot stud)? I'm going by the diagram in a Haynes manual (just so you know).
I've got a bushing bad (movement where the arm mounts to the body) and want to make sure I get the right bushing. I'm not really interested in performance as this is just a daily driver to get to and from work.