Quote:
|
Originally Posted by Mickey#1
A dead battery can still show 12 volts.
Remove the battery cables & clean the cable ends with sandpaper or a wire brush. Some years had 2 cables that come together in a single rubber boot. If your car has that setup then you need to remove the rubber boot in order to clean where the 2 cables come together. Apply some dielectric grease to slow down future corrosion & reassemble.
If you still have no power then try jumping the battery or remove the battery & have it tested at your local auto parts store. Let us know what you find.
|
Found corrosion on battery cables/terminals. Cleaned terminal and cables and underneath rubber boot. Also I applied grease to connections. I would like to thank you for your help. It was greatly appreciated.