Quote:
|
Originally Posted by XJAce
If you have an model then the whole black dash covering has to be taken off(4 philips head screws) then the stock headunit should be held in with just 2 philips head screws that you unscrew and the unit should just pull out and you disconnect everything from the back of it.
|
Yeah, have fun getting the top clip to let go. You might think you were asking it to give up its baby. I did not just "slide" out. I have a 91 Cherokee, and I had a crap of a time getting the old unit out. That clip must be hurricane rated.
I did finally get it out.
Thanks for the info though. It did save me from doing anything too stupid.