Blue Bowtie:
It does just as you describe (like always), but then NONE of the lights stay on after that. Everything is off.
MT-2500:
Does it have a 243 or 246 transfer case?
I really have no clue on this one
Does the shift buttons have a auto button or just 2W -4W high - and 4W low?
2W, 4Hi & 4Lo
Is 4 wheel still working?
It was in 4 wheel when it messed up. I was able to shift it to 2 wheel by putting the truck in nuetral and playing around with the buttons.
Does it shift to 4W low and 4w high?
Not anymore. When I press a button, nothing happens. If I put the truck in nuetral and push the 4Hi button, both LEDs for the 4Hi & 4Lo will blink a few times, and then they go out again. None of the three LEDs on the buttons are staying on under normal operation, but they do blink during self test at startup.
I was doing some searching (I know, wonderful tool) after I had posted this and found this thread...
http://www.automotiveforums.com/vbul...d.php?t=692443
Think this is the same problem I'm having? If so, it sounds like a simple fix.
Thanks for the responses guys.