|
Re: Fuel Injector..............
The 134-inch OHV is fairly easy. OHC engines are bit more of a chore. For single cam engines, the injectors are side-feeders and are held in by a forked rail. The rail is held at the front (RH) of the engine by the regulator screw, and has two more screws along its length. If the injector is on either #3 or #4, you don't even have to remove the regulator, but can remove the two rearmost screws and flex the rail outward to release the injectors.
Make sure you clean the area around the injectors before removing them to prevent contaminating the fuel rail and intake.
|