|
Re: 01 Jimmy, bad hub(s)?
What is the mileage?
Most wheel bearings do change noise when turning the wheel a little.
But they are a double roller bearing and if both sides of bearing is bad turning the wheel may not change noise.
A ABS scanner code check will point you to the abs problem.
On the bearing raise it up and block it up good and start engine and run at a low speed and see if you can hear which wheel the noise is coming from.
A Dr. type stethoscope or a big long pipe or a bar may aid in hearing the problem side and also sometimes you can feel it.
Also shake wheel for any free play.
__________________
Remember proper testing gives us the answer to many problems.
MT
|