[RIP]

Find and remove a couple of plastic plugs around the top of the panel. Remove the screws under the plugs. Remove the screw from the "finger well" in the arm rest. Remove the last screw from the window/door switch panel. Remove and disconnect the panel. Now grab the bottom of the panel and pull out. You'll hear the "tree fasteners" pop loose. Now wiggle the panel up and over the door lock button and upper seal and you're done. For the rest it's a matter of finding the screws and doing the same out and up manuever. This is based on a 96. A 99 should be close sinse they are in the same generation.