Quote:
|
Originally Posted by bolson9
tested back stop switch on the brake pedal, thats not it either from what I was told.  Nothing happened when tested, no lights.. |
Well, that sucks. It's time for a qualified electrician to do all these tests.
If there's no power at the BOO switch, the power source needs to be traced backward to where-ever it's failing.
If a Volt tester verifies there's no power on either wire at the BOO switch, I would also touch a 12v hot wire to the wires at the back of the BOO switch to see if the lamps light.
Again, I sure hope those BULBS are known to be good !!