ok so here are the things I did
I changed the Fuel Filter
Found out the car was 92 not 96 LMFAO
saw this gap by the IAC valve (im not sure if its what it is, which is on the side of TB)
I have been following the sticky thread on How to section:
http://www.automotiveforums.com/vbul...d.php?t=620747
I cleaned some stuff with break cleaner didn't help much
I can't get car to start, now i am replacing the rotor and the cap on the distrubitor and I think I am about to buy a whole new distrubitor! if not that probably will replace the plug wires also... Still not, i think I will find a hammer
I am convinced that I added way too many injection cleaner and other shit to the tank, thats why it was hesitating like that. I gotto get it running to flush the gas out and fill it up with normal gas tho
So I am where I was started, sparking issue, electrical issue, whatever u name it.
I will also try to clean up the injectors with some gas and perhaps the regulator
PS that new rotor i bought is wrong bc cap wouldn't fit in, its bigger than the original one