|
Re: Tire changing '02 Rodeo
Nope you dont take that nut off. Thats the hub nut. Isuzu wheels are 'hubcentric' so the weight is on the hub and not the lugs. That means the wheel has to fit kind of tight to the hub. If the wheel hasnt been off for a while it can get stuck.
Try this..
Put the lug nuts back on but not tight. Leave a little gap between them and the wheel. Lower the truck off the jack. Then push on the truck so it moves side to side. Sometimes that will pop loose stuck wheels.
__________________
--Dave
1999 Rodeo LS 3.2 4x4 5 Speed
32x11.50-15 BFG T/A KO
3" Lift - Rancho 9000x
Rear No-Slip Locker
Flowmaster 2.25" 50 Series
There is a very fine line between "hobby" and "mental illness." - Dave Barry
|