[Rlpsctt]

The same issue happened to me. You have found the screw and that's removable by using a torques bit (I think it's a 15 or 20 bit). It been a while since I took my door off. There's a plastic bezel that is around the release handle. If you have a thin metal awl, that would help. You can press the tabs down. The first time I just pull the bezel slowly without breaking the tabs. For the door, ask for a tool from an automotive store. I used a plastic stick and slid it behind the door. Be careful. You need to pry in the location of the white plastic retainers. Once you have popped out all the retainers then the door can be pulled away. Remember to unplug the wires. This is general info. Good luck.