|
Re: clutch fluid leak
Well PITA was right. I tried everything I had to loosen that bolt. I ended up cutting the hard line right at the bolt, then using a 10mm socket and wrench and to no avail, came right out with a little pressure. Now that I've rebuilt the cylinder and have it all back in, I have a whole new set of problems. Remember that line I had to cut? All I have to do is flare the end of it, but it's pissing me off more than it should. Mainly because I can't get the fitting (bolt) to slide on the hard line freely... it's like there's some mystery bend in the hose that's not allowing it to go on all the way. But it's dark out now and I can't deal with it at the moment. So far only one broken flashlight from all the frustration...
|