|
Re: 03 Cruiser has no power
This is actually not a reply but more like an update. I got to thinking and I decided I would change the positive cable on the car since it looked like it was a little corroded. As I was taking it off, the post connection came off in my hand. Then I proceded to undo the bolt from the starter, and the nut was loose. Also after removing the cable from the starter I found that the cable where it connects to the starter was almost burnt into. Put the new cable on, hooked everything back up... and poof.... it cranked right up and started. Go figure...........
Anyways, thanx for letting me take up everyone's space on here. I will still be around cause I have a '90 Ford Taurus that ain't running, and also an '88 Ford Ranger that ain't running.
Thanx Again as always
Mikel
|