|
Re: so im thinking about dataloggers
the LM-1 is a wideband O2 kit. i'm not that familiar with the scanmaster 3. i assume it will allow you to monitor the wideband O2 voltage?
since you have a 1st gen, you can get a palm pilot off ebay ($20), load some free datalogging software (MMCD v1.8g, free & open-sourced software, but it is VERY good software), and you'll need a datalogging cable ($25 ebay) to connect to the OBDI diagnostic port. however, just like the scanmaster 3, i ASSUME it will allow you to monitor with wideband O2 voltage. i'm not sure, perhaps Talskinyguy or Hotshot will chime in.
the SAFCs by Apexi are very good for tuning and improving power and fuel economy. and going with a WB O2 is the proper way to tune. i believe you just have stock turbos and injectors, but its a good idea to learn how to tune before you upgrade.
__________________
93 3000GT base
K&N | long tube headers | 3sx crank pulley| testpipe | Addco front/rear sway bars (3SX) | rear strut bar & front 3-point strut bar (by JonVr4 on 3Si) | solid motor mounts | LSD insert | KYB GR-2 struts | intrax springs | adj. control arms | ss brake lines | 16% taller 5th gear (teamrip.com) | H4 conversion | push-button start | datalogger | HKS S-AFR | PLX WB O2
coming soon: adj. cam gears | bi-xenon HID retrofit
|