Quote:
|
Originally Posted by wyatt_earb
I used rtv gasket on the pan when I changed the filter. It never dropped out of OD. I'm not sure what the TV cable is.... And I'll have to take it out and watch the mph while its shifting, to be honest it seems to run and shift fine. Never shifts hard or slips, but it'll go up in rpms while driving 65+ for and extended distance and it acts like its not all the way in gear. But itll ride at 55mph fine. I'm going to try the break switch out this weekend and if that doesnt work then I'll try out the solenoid. Hope this helps...
|
Rule no 1
Do not use RTV gasket sealer on the 700R4 pan gasket.
That may be some of your problem.
The sealer plugs the OD band servo release drain hole.
And can burn up band and trans fluid and transmission.