View Single Post
  #4  
Old 01-26-2007, 10:39 AM
andrewgeorge22 andrewgeorge22 is offline
AF Newbie
Thread starter
 
Join Date: Jan 2007
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 98 oil pump diagram

Quote:
Originally Posted by MT-2500
If it is coming out of the sensor replace it.
The oil pump in on front of crankshaft behind timing chain.
What you see on the outside is the oil filter adapter and oil sending unit/sensor.
Replace the sensor and you should be good.
For pictures the Auto Zone web site may have a how to on it.
Good Luck And let us know how it goes.
Thanks for the advice! After cleaning the area so i could see exactly where the oil was coming from it turned out to be the sensor... Pretty simple procedure.
Reply With Quote