Success!
I went with a very very very light going over with 2000grit paper then rubbed a bit harder...nice shine!
There is one thing I'm worried about, the grooves. On the FTO there are some grooves [ie. side skirts are molded with the body, therefore that is one of the grooves] that are hard to rub and it is almost an outline of the orange peel.
I have tried using a q-tip as to Guiddy's instructions but it doesn't seem to be doing anything....
The polished section on top of the groove is already as much polished as possible, so if I can't get into that groove and keep polishing on top of it it will go sinking into the primer.
Any suggestions as to how to rub in there without going over the top section?
