Quote:
|
Originally Posted by shorod
Did the mirror come from a similar vintage Explorer/Mountaineer? If so, the wiring is as follows:
Pin 1: Not used
Pin 2: Exterior lamps
Pin 3: Reverse output of Digital Transmission Range Sensor if Automatic transmission, backup lamp switch if manual transmission
Pin 4: Ground
Pin 5: Fuse 36 of Instrument Panel fuse box (7.5A) - Hot at all times
Pin 6: Fuse 11 of Instrument Panel fuse box (7.5A) - Hot in Start and Run
-Rod
|
Rod
I was told that the mirror was from a 1997/98 Explorer, which is what I have.
Thanks for the information on the wires. My question is #3 pin, what is the reverse output of the digital transmission range sensor??? Is that the reverse back up hot wire on the transmission ? Like the one that puts the lights (BU) on?? Also how do I determine the #1 pin Thanks