|
Re: 99 Blazer Front Half shafts??
Well I still have yet to get the splines out of my broken front differential when I had to replace my differential.
But in my experience, you may be better off popping the support that holds the hub on away from the ball joints. Otherwise you may not have enough clearance.
If you decide to continue on with this, I would really look hard any parts that may need replaced b/c you will have most of your front end loose at this point.
__________________
1999 Blazer 4x4 LS "Blackie"
Monroe Reflex Shocks
Moog U/L Ball Joints
K&N FIPK Gen 2 Cold Air Intake
Flo-pro Soundpro exhaust
Optima Redtop
132k miles and still rolling....
|