[TalonEclipseMixGsx]

Ok I got everything i needed to do the fuel pump rewire on my gsx today. On the website i was reading from it was for a fwd. It's not till i got everything apart that i found that my wiring and the wiring from the instructions were different. http://www.raktron.com/fuel/rewire5.html Mine has a few more wires. I looked everywhere for instructions for a 2g awd and came up with nothing. Im pretty sure the thick black wire is ground, but when i checked the black w/blue stripe wire for voltage i got .78V, not even a full volt. I read somewhere that said it should be 11V before the rewire. I did check the voltage with the car running too. My question is which wires are the ones that need to be cut, and on the relay, which terminal does the positive from the battery go? Every 1g directions i read said it goes to the 30, but that one with the 2g said to it goes on 87. If anybody has some advice for me i would really appreciate it. Thanks